Product Details
I. Product Overview
This product is a split-core current transformer with voltage detection capability. It is designed to measure cable line currents and induced voltages. Additionally, the Phase A transformer features reserved internal space specifically for mounting functional circuit boards.
II. Electrical Parameters
| Project | Parameter | Remarks | |
| Electrical Parameters | Rated Current Ratio | 400A:50mA | Turns Ratio 8000:1 |
| Maximum Current | 800A | / | |
| Input Frequency | 50~60Hz | / | |
| Accuracy Class | 0.5S | / | |
| Ratio Error at Rated Point | ≤±0.2% | / | |
| Phase Displacement at Rated Point | <20' (Input 400A, Load 20Ω) | / | |
| Phase Displacement Variation | <19' (Rated 1%~120%) | / | |
| Ratio Error Variation within Aperture | <0.15% (Ratio error variation with a 10mm diameter wire at different positions within the aperture) | / | |
| Burden Resistor | <20Ω | / | |
| Open-Circuit Voltage | 4~8V | / | |
| Phase A Rated Voltage | 220V | / | |
| Voltage Measurement Range | 100V~330V | / | |
| Voltage Measurement Accuracy | 10% | / | |
| Temperature Sensor Measurement Range | -10°C ~ +100°C | / | |
| Temperature Measurement Accuracy | ±2°C | / | |
| RS485 Interface Type | Polarized, Half-Duplex | / | |
| Communication Baud Rate | 1200bps, 2400bps, 4800bps, 9600bps, 19200bps, 38400bps; Factory default: 9600bps, Even parity. | / | |
| Communication Protocol | DL/T 645-2007, Modbus | / | |
| CT Secondary Current Output Terminal | RJ11 6-Pin connector, cable length 5.5m | See Section III below for details. | |
| Functional Board Output | RJ45 8-Pin connector, cable length 5.5m | See Section III below for details. | |
| Performance Parameters | Core Material | Nanocrystalline | / |
| Operating Temperature | -40°C ~ +75°C | / | |
| Power Frequency Withstand Voltage | AC 5000V | / |
III. Dimensional Drawing (Unit: mm)

4. Dimensional Drawing (Unit: mm)
1.A Phase Transformer

2. Phase B & C Transformer

ZH
EN

