Product Details
I. Product Overview
The Motorized High-Precision Energy Harvesting Module for Transient Waveform Recording is designed for short-circuit and ground fault monitoring and alarming in 5–35 kV overhead distribution line systems. It features real-time online measurement of phase line currents and ground currents. The acquisition unit is equipped with micro-power wireless communication, and the concentrator unit can upload fault information to the master station via a 4G wireless network to achieve fault identification and localization.
This product is designed as a companion for the acquisition unit of overhead line fault indicators, enabling the rapid localization of line fault types and positions while recording fault waveforms. Improved stability of electric field sampling enhances the accuracy of fault diagnosis. The product utilizes a motorized installation method to protect the cables, and advanced manufacturing and control processes effectively ensure product consistency and reliability. This series of products fully complies with the 2019 State Grid Corporation of China (SGCC) Technical Specifications for Bidding of Distribution Line Fault Indicators and the specific requirements of the Shanghai region.
II. Electrical Parameters
Category | Project | Parameters | Remarks |
Electrical parameters | Typical current sampling accuracy | <; ± 0.2% (in conjunction with panel testing) | / |
Power supply CT | with a cross-sectional area of 10 * 20mm, made of Permalloy, 300 turns | optional 10 * 10mm magnetic core | |
Power supply capability | Input current 1A Load 1.8k Ω, output voltage>3.1V | / | |
Thermistors | NTC Thermistor, B3950100K Ω | Optional components | |
Temperature measurement range: -40~120 degrees, accuracy: ± 1% | |||
Protective ability | IP68 (1.5 meters deep for 30 hours) | / | |
Flame retardant rating | UL94-V0 | / | |
Cable grip strength | When used in conjunction with a rubber pad, the lateral tension of the compression spring is ≥ 50N, and the longitudinal tension is greater than 120N. | / | |
Impact resistance | can withstand a 1.0 meter 0 degree drop of 3 degrees. Next, the product has no breakage | / | |
rust prevention ability | intermediate salt spray 96 hours | / | |
working temperature | -40 ~70 degrees | / | |
Relative humidity | <; 95% RH | / | |
Altitude | <; 4000 meters | / | |
Other parameters | Main shell material | PC +Fiberglass | / |
solar panels | 3 A solar panel with an output power>1.8W | can be optionally equipped with one 1W solar panel | |
(standard test conditions STC: 1000W/m2, tested in AM1.5, 25 ℃ environment) | |||
spring material | 304 Stainless steel | / | |
installation method | electric installation tool installation | / | |
transparent cover screw torque | 7.5 ~8kgf.cm, Tighten | / | |
electric field measurement | metal electric field sheet | / | |
rubber pad | outer diameter 11-22mm cable (with rubber) installation thick rubber pad | / | |
Outer diameter 22-28mm cable (with rubber) with or without thin rubber pad | / | ||
ROHS The standard | meets the requirements of the "Management Measures for the Restriction of Hazardous Substances in Electrical and Electronic Products" issued by the Ministry of Industry and Information Technology of the People's Republic of China and eight other ministries in 2016, and also fully complies with the requirements of the EU RoHS V2.0 or above standards | / |
III. Dimensional Drawing (Unit: mm)

ZH
EN



